TPO(POE) RTP ESD A 2800-65A
TPO(POE) RTP ESD A 2800-65AUse performance
TPO is octene and a polyolefin resin composition, the continuous phase and the dispersed phase rendering the two-phase separation of the polymer blend by a scanning electron microscope or a phase contrast microscope, and may be formed of rubber is a continuous phase, the resin for the dispersed phase orthe rubber as the dispersed phase, the resin is a continuous phase, or both to render the continuous phase when the interpenetrating network structure. With the phase changes, the blends also change. If the rubber is a continuous phase, rendering approximation vulcanizate; resin is a continuous phase, the performance is close to the plastic.
Processing and coordination: TPO without mixing and curing. Molding process can be usually thermoplastic processing equipment. Molding processing temperature and processing the pressure should normally be somewhat higher, can be processed in the high processing speed. Injection molding, extrusion molding, also available calender processed into a sheet or film, and thermoforming can be manufactured shape of complex products. Various pigments may be added to prepare a different color. By the use requirements of products, some manufacturers provide various grades such as type special batch. Sometimes improve the processing performance and the use of performance of certain products, or to reduce costs, but also can be added to certain complexing agents, such as antioxidants, softeners, and fillers, coloring agents. Scrap and recyclable waste reprocessed use. But generally the mixing ratio does not exceed 30%, so that no impact on the performance of TPO on Blends.
The basic characteristics: (1) TPO having the general physical properties of the thermoplastic elastomer, such as moldability, scrap recycling and vulcanizate properties. (2) low prices, and relatively low density, and thus the volume low price. (3) is excellent, the use of a wide range. (4) The weather resistance, and good aging resistance. (Resistance to compression set and abrasion is not very good. Application: mainly used for modified toughened PP, PE and PA in the automotive industry to produce bumpers, fenders, steering wheel, pad wires heat and environmental resistance in the cable industry requires high insulation and sheath is also used in industrial products such as hoses, conveyor belts, plastic sheets and molded products. medical equipment and household appliances, sports goods, toys, and packaging film and so on.
| TPO(POE) |
RTP |
|
EMI 2862-63A |
| TPO(POE) |
RTP |
|
EMI 2862-75A |
| TPO(POE) |
RTP |
|
ESD A 2800 |
| TPO(POE) |
RTP |
|
ESD A 2800-55A |
| TPO(POE) |
RTP |
|
ESD A 2800-65A |
Key Words：ESD A 2800-65A，TPO(POE) ESD A 2800-65A，RTP ESD A 2800-65A