PA6 Techmer-Lehvoss Electrafil J-3/CF/40Use performance
The chemical and physical characteristics of PA6 and PA66 are very similar, however, its low melting point, but a wide range of process temperature. Its impact resistance and anti-solubility better than the PA66, but also more moisture. Because many quality characteristics of the plastic parts will be subject to the impact of moisture absorption, PA6 design products to give full consideration to this point. PA6 plastic materials in order to improve the mechanical properties, often adding various modifiers. Glass is the most common additives, sometimes also added in order to improve the impact resistance of synthetic rubber, such as EPDM and SBR. For products without additives, PA6 contraction rate of between 1% to 1.5%. The molding shrinkage assembled mainly by crystalline material and moisture absorption. Actual shrinkage and plastic parts design, wall thickness and other process parameters as a function of.
Range of industrial applications
Polyamide glass fiber reinforced material can be provided according to the characteristics of the product requires adding the glass content in the range of 5-60%, such material has a good strength, heat resistance, excellent impact resistance, good dimensional stability and low warpage, and the like. In order to meet the requirements for use in industrial, reinforced polyamide material should have the following requirements:
1) excellent in strength and durability, excellent rigidity and heat resistance in combination
2) excellent coloring properties, perfect surface appearance can apply to the complex structure of shape, and help design and development to develop new styling products
3) good workability, excellent mobility and thermal stability of the material processing conditions are more liberal, the miniaturization of injection molded parts
4) high thermal stability, wave soldering up to 270 degrees, not linked to tin.
| PA6 |
Techmer-Lehvoss |
Electrafil |
J-3/CF/30 |
| PA6 |
Techmer-Lehvoss |
Electrafil |
J-3/CF/40 |
| PA6 |
Techmer-Lehvoss |
Electrafil |
J-71/CF/20/EG |
| PA6 |
Techmer-Lehvoss |
Electrafil |
J-71/CF/40/EG |
Key Words：J-3/CF/40，PA6 J-3/CF/40，Electrafil J-3/CF/40，Techmer-Lehvoss J-3/CF/40